Online Cisco Certification Exam–Just4exam

Pass4side help you pass any IT exam!
1. The Branch Office platform includes a Media Gateway (MG) 1000B Core connected to a Communication Server 1000 Rls. 5.0 system at the main office over a LAN or a WAN. This configuration enables a secondary location to centralize the call processing of its IP-based communication network. Which statement is a true about the deployment of the MG 1000B?
A. It must be distributed in pairs.
B. It can be configured for survivability.
C. It can be distributed across a multiple building IP network.
D. It must be co-located with the Call Servers within a building.
Answer: C

2. In a Communication Server (CS) 1000 Rls. 5.0 Branch Office solution, which hardware component is required to host the Network Routing Service (NRS) software?
A. Call Server
B. Signaling Server
C. MRV Terminal Server
D. Media Gateway Controller (MGC)
Answer: B

latest pass4side nortel exam update information

Do you want to know latest pass4side nortel exam information for your timely nortel exam pre? now pass4side nortel exam product become more and more popular, but on some famous forum many candidates asked one questions for many times. It is that they want to know the latest pass4side nortel exam version, some candidates can load pass4side website directly ask pass4side online, it?s the best way, but some candidates just ask this question on other forum, and download those pass4side free nortel exam braindumps on other exam website or share section. you must know that pass4side nortel exam product usually updated, including the pass4side sotware. those pass4side nortel exam questions on other exam website may be outdate for actual tests, and the pass4side version numbers is also uncertain, so the best way for download pass4side nortel exam samples is visiting pass4side website.

Nortel 920-481 Exam CallPilot ris.5.0 Unified Messaging Certification

 1. Your customer relies heavily on the CallPilot servers to exchange messages between sites. Due to the volume of the
traffic, the company needs to account for each department’s usage. Which bill-back report would you recommend the
company regularly generate?
A. Network Usage to track long distance charges
B. Messaging Usage to track activity on mailboxes
C. DTT Usage to track telephone activity to user or department
D. Remote Notification (RN) Usage to track the cost of outcalling by mailbox
Answer: A

2. A customer has a CallPilot system on a 1002rp server with 2 MPB16-4 cards. The customer has decided to migrate the
system beyond the current 96 channels to support fax. Which hardware changes must be implemented?
A. Install an additional hard drive.
B. Remove the MPB16-4 cards and install 2 MPB96 cards.
C. Remove the associated MGate cards and the 7-drop cable.
D. Remove the RAID configuration.
Answer: B

Nortel 920-183 Exam Callpilot RIS.5.0 System Administrator Certification

1. After installing CallPilot Desktop Messaging, an end user needs to retrieve the messages from the CallPilot mailbox.
Which protocol enables desktop messaging clients to retrieve messages from the CallPilot server?
A. Simple Mail Transfer Protocol (SMTP)
B. Internet Message Access Protocol (IMAP)
C. Lightweight Directory Access Protocol (LDAP)
D. Simple Network Management Protocol (SNMP)
Answer: B

2. CallPilot Desktop Messaging clients at a company are unable to send messages from the desktop interface. Which
messaging protocol must be configured to enable this capability?
A. Simple Mail Transfer Protocol (SMTP)
B. Internet Message Access Protocol (IMAP)
C. Lightweight Directory Access Protocol (LDAP)
D. Simple Network Management Protocol (SNMP)
Answer: A

3. After a user attempts to launch an Email-By-Phone session by pressing 8-9, the system responds by stating that the
message list is empty and returns the user to CallPilot messages. What is a possible cause for this scenario?
A. The message list on the email server is empty.
B. The user has an incorrect user ID or password.
C. The Email-By-Phone feature is not enabled for this user.
D. The email address is entered incorrectly in the mailbox properties.
Answer: A

Pass4side is the leader in supplying certification candidates with current and up-to-date training materials for Nortel and Exam preparation. Pass4side Nortel resources are constantly being revised and updated for relevance and accuracy. We 100% guarantee the materials with quality and reliability which will help you pass any Nortel certification exam.

List of Nortel Certification Exams
• NCDE
• NCDS
• NCSE
• NCSS
• NCTE
• NCTS
• Other Nortel Certification
Latest Nortel Exams
920-805 - Nortel Data Networking Technology
922-090 - Communication Server 1000 Rls.5.0 & IP Networking Design
Popular Nortel Exams
920-123 - NCSS-BayStack/BPS Switching Exam
920-107 - NNCSS-Periphonics MPS 100 Installation and Maintenance
920-118 - NNCSS-Symposium Call Center TAPVAgent install & Maint.
920-136 - NCDS - Ethernet Switching Solutions
920-163 - NCSS-Contact Center Manager RIs.6.0 Technical Support Exam

More Nortel exam download : http://pass4side.com/Nortel.html

1. A manufacturing company is building a new plant. The equipment in the plant has been known to cause interference
with the network at other sites and they want to be sure that they choose a media that is resistant to electrical interference.
Which type of cable should they use?
A. thick coaxial cable
B. fiber optic cable
C. unshielded twisted pair
D. plenum twisted pair
Answer: B

2. A department was moved from one floor to another. When the department was on the old floor, the users connected
through a mixture of 10 Mb hubs and 10/100 Mb switches. When the department was moved all the hubs were replaced
by 10/100 Mb switches.
Two of the users are reporting that the network is much slower on the new floor even though the hubs were replaced. You
discover that the switch ports these users connect to were used to connect to the hubs and are manually configured for
10Mb half-duplex. The PCs were connected to the switch and were manually configured for 100 Mb full-duplex.
What could have been done to avoid this issue?
A. Auto-negotiation only needed to be enabled on the switch.
B. Auto-negotiation should have been enabled on the switch ports and on the PCs.
C. Auto-sensing only needed to be enabled on the switch.
D. Auto-sensing should have been enabled on the switch ports and on the PCs.
Answer: B

3. A corporation has decided to save money and buy remanufactured IP telephones. They purchased Phase 1 (One) IP
telephones that do not support Power-over-Ethernet (PoE). The Ethernet Switches they purchased do supply PoE per the
IEEE 802.3af specifications.
Which statement regarding the Phase 1 IP telephones is true?
A. They must be plugged into AC power outlets to function.
B. They can use a power splitter to receive both power and data from the Ethernet Switch.
C. They can use a power splitter to receive both power and data from the Ethernet Switch, but must also be attached to
an AC outlet to boot and acquire an IP address.
D. They must be plugged into AC power outlets to boot and acquire an IP address. After the telephone is operating, it can
operate off the Ethernet Switch only.
Answer: B

4. Which order is correct for these components in the Ethernet frame?
A. destination MAC address, source MAC address, length/type field, data, FCS
B. destination MAC address, source MAC address, data, length/type field, FCS
C. source MAC address, destination MAC address, length/type field, data, FCS
D. source MAC address, destination MAC address, data, length/type field, FCS
Answer: A

NORTEL 922-090 Communication Server 1000 Rls.5.0 & IP Networking Design

1. You have been asked to engineer an IP Peer Networking solution for a Communication Server (CS) 1000 Rls. 5.0
network. The customer requirements include a centralized numbering plan arrangement, and they want to use SIP
Trunking. What component is required as part of the centralized numbering plan for the network?
A. Network Connect Service
B. H.323 Gatekeeper
C. Terminal Proxy Server
D. Network Routing Service
Answer: D

2. You have been asked to engineer an IP Peer networking solution for a Communication Server (CS) 1000 Rls. 5.0
network. The customer requirements include a centralized numbering plan arrangement using trunks with Transport
Layer Security (TLS) enabled. Which components are required as part of this solution for the network? (Choose two.)
A. SIP Proxy Server
B. H.323 Gatekeeper
C. Terminal Proxy Server
D. Network Routing Service
Answer: AD

3. A customer is looking to take advantage of the flexibility that a Nortel Solution provides them. They currently have a
Communication Server (CS) 1000 Rls. 4.5 network with eight PBX systems connected via IP Peer Networking and the
H.323 Protocol. Which options are valid when migrating the customer’s network to SIP trunking between the sites?
(Choose three.)
A. Add SIP Access Ports to each CS 1000 system on the network to enable SIP Trunking.
B. Add SIP Access Port Licenses to each of the existing NRS Platforms on the network.
C. Enable the SIP Proxy Service on each of the CS 1000 Signaling Server Gateways.
D. Enable and configure SIP Redirect/Registrar Services on the existing Network Routing Servers (NRS).
E. Enable and configure the SIP Gateway Services on the various CS 1000 Signaling Server system endpoints.
Answer: ADE

4. Which two statements most accurately describe the functions of the Media Gateway Controller (MGC) card in a
Communication Server (CS) 1000E Rls. 5.0 system? (Choose two.)
A. The MGC supports peripheral cards for TDM services.
B. The MGC provides basic call processing functions for the CS 1000E.
C. The MGC provides a gateway controller for IP media gateways in the CS 1000E.
D. The MGC supports PRI/PRI2/DTI/DTI2 trunks, BRI trunks, D-channels and clock controllers.
Answer: CD

5. A customer is deploying a Communication Server 1000E system and has requested that the system be engineered as
High Availability. What is required to consider the system High Availability? (Choose two.)
A. Software package 405
B. Software package 410
C. Dual Signaling Servers
D. Alternate Call Servers with automated database replication
E. Dual Call Processors using a High Speed Pipe for database synchronization
Answer: BE

More download link: http://pass4side.com/922-090.htm

More free demo from: www.pass4side.com

1. A manufacturing company is building a new plant. The equipment in the plant has been known to cause interference
with the network at other sites and they want to be sure that they choose a media that is resistant to electrical interference.
Which type of cable should they use?
A. thick coaxial cable
B. fiber optic cable
C. unshielded twisted pair
D. plenum twisted pair
Answer: B

2. A department was moved from one floor to another. When the department was on the old floor, the users connected
through a mixture of 10 Mb hubs and 10/100 Mb switches. When the department was moved all the hubs were replaced
by 10/100 Mb switches.
Two of the users are reporting that the network is much slower on the new floor even though the hubs were replaced. You
discover that the switch ports these users connect to were used to connect to the hubs and are manually configured for
10Mb half-duplex. The PCs were connected to the switch and were manually configured for 100 Mb full-duplex.
What could have been done to avoid this issue?
A. Auto-negotiation only needed to be enabled on the switch.
B. Auto-negotiation should have been enabled on the switch ports and on the PCs.
C. Auto-sensing only needed to be enabled on the switch.
D. Auto-sensing should have been enabled on the switch ports and on the PCs.
Answer: B

3. A corporation has decided to save money and buy remanufactured IP telephones. They purchased Phase 1 (One) IP
telephones that do not support Power-over-Ethernet (PoE). The Ethernet Switches they purchased do supply PoE per the
IEEE 802.3af specifications.
Which statement regarding the Phase 1 IP telephones is true?
A. They must be plugged into AC power outlets to function.
B. They can use a power splitter to receive both power and data from the Ethernet Switch.
C. They can use a power splitter to receive both power and data from the Ethernet Switch, but must also be attached to
an AC outlet to boot and acquire an IP address.
D. They must be plugged into AC power outlets to boot and acquire an IP address. After the telephone is operating, it can
operate off the Ethernet Switch only.
Answer: B

4. Which order is correct for these components in the Ethernet frame?
A. destination MAC address, source MAC address, length/type field, data, FCS
B. destination MAC address, source MAC address, data, length/type field, FCS
C. source MAC address, destination MAC address, length/type field, data, FCS
D. source MAC address, destination MAC address, data, length/type field, FCS
Answer: A

5. Which statement about broadcast domains and collision domains is false?
A. When a connection is Ethernet full-duplex, the collision domain only contains two devices.
B. When a connection is Ethernet full-duplex, the broadcast domain only contains two devices.
C. When a hub is used to connect devices, all ports are in the same collision domain but not in the same broadcast
domain.
D. When a switch with multiple VLANs is used to connect devices, all ports are in the same broadcast domain.
Answer: B